Categories:

1. GENERAL SPECIFICATIONS:

The incinerator for medical waste needs to be designated for the destruction of all kinds of waste produced by the Center for Health (waste type hospital, clinic, medical laboratory for destructive capacity of 30kg / h). Avoid development of black smoke and dust formation tine loading of waste;
. Afterburner
? 1 for controlling the temperature of the afterburner

– Thickness:                    80 mm
? Provide regular and complete combustion of the waste;
. Combustion
1100 ° C
Mixed combustion chamber: 0.3m3
– The Whole installation will conform to European standards (EU)
– Regulators of fever with digital display:
– The burner ensures a minimum temperature of 1100 ° C constant;
– The hearth is equipped with a stirring system of waste combustion is controlled switch;
? 1 to modulate the temperature of the combustion chamber
– there’s a motor operated valve that controls the flow in line with the combustion.
Afterburner

0.11 KW
– Operating temperature:             1650 ° C maximum
POWER BURNER
Air fan:
Post combustion: 0.2m3
900 ° C
– The afterburner is equipped with access doors in order to ensure regular cleaning of dust;
Chimney    Height: 5m, Diameter: 280mm
‘ TEMPERATURES:
– The electric power is 220V 50Hz single phase.
* Refractory:
– The pressure of the fan is 500 millimeter CE to pierce the bulk of waste during combustion.

b. Post – combustion chamber:

– Heal the gasoline has a minimum temperature of 1100 ° C with a minimum residence time of 2 seconds the afterburner is to;
* Insulation:
– Operating temperature:             1000 ° C maximum
– Nature:                    Refractory bricks with 42 alumina
Operation    12h/24, 6d / 7
– The sole combustion is composed of a refractory lining specially designed to meet the thermal, mechanical and corrosive liquid waste requirements and molten glass;
– Automatic monobloc burner and flame plunge equipped with an electronic ignition system and permanent ventilation.
Fuel    diesel oil
Volume of combustion

room Combustion: 0.3 m3
? The manual controls are provided on each individual item. PRODUCT DIMENSIONS

Description    Dimensions
– The lining is made of refractory bricks and a thermal insulating material ensuring a minimum temperature of the sheet;
? Provide controlled guaranteeing the absence of colour, cloud of smoke or burning odor;
0.11 KW0

Fan power    0.37 kW

Burner combustion:

– The combustion chamber is equipped with a burner to line to ensure correct temperature for the total destruction of waste combustion;
– The dimensions of the floor are equipped laterally main air nozzles that fuel combustion;
Combustion
– The recovery operation of the ashes will take place once a day line before beginning the day’s operation.

Composition of the refractory lining:
? Allow limited fuel consumption

The incinerator with pyrolytic combustion must have:

a. Combustor:

– Chamber strong steel support legs sheet;

Description    Dimensions
Destructive capacity    30 Kg / hour
Operation    12h/24, 6d / 7
Fuel    diesel oil
Chimney    Height: 5m, Diameter: 280mm
Volume of combustion

chamber Combustion: 0.3 m3
Post combustion: 0.2m3
Mixed combustion chamber: 0.3m3
` TEMPERATURES:
. Combustion
. Afterburner
900 ° C
1100 ° C
POWER BURNER
Combustion
Afterburner

0.11 KW
0.11 KW0

Fan power    0.37 kW